TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 522 of 1318

TM 9-2320-328-13&P-1

0063-46

DRAFT

0063

HWT2171

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 71.

Loosen four screws and remove bumper turret control cover.

Do not disconnect wires.

While operating bumper turret control joystick to right (passenger side) position

(WP 0004), check if bumper turret control RIGHT LED illuminates.

If bumper turret control RIGHT LED does not illuminate, replace bumper

turret control (WP 0375).

Step 72.

While operating bumper turret control joystick to left (driver side) position (WP 0004),

check if bumper turret control LEFT LED illuminates.

If bumper turret control LEFT LED does not illuminate, replace bumper turret

control (WP 0375).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION