TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 542 of 1318

TM 9-2320-328-13&P-1
0064-14
DRAFT
0064
HWT2957
Step 16.
Connect main wire harness pump house wire harness 4-pin connector.
Disconnect
main wire harness pump operator’s panel 27-pin wire harness connector.
With a test
lead set, check for continuity across wire 2330 from main wire harness pump operator’s
panel 27-pin wire harness connector, terminal 27 to pump operator’s panel wire harness
water level gauge connector, terminal 5.
a.
If there is continuity, repair wire 2330 in main wire harness if repairable
(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).
b.
If there is no continuity, repair wire 2330 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace pump operator’s panel
wire harness (WP 0303).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top