TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 543 of 1318

TM 9-2320-328-13&P-1

0064-15

DRAFT

0064

HWT0711A

Step 17.

While an assistant puts DIRECT TANK FILL switch to AUTO position (WP 0004), check

if direct tank fill valve operates to open position.

If direct tank fill valve does not operate to open position, go to Step 22.

HWT1516

Step 18.

Put DIRECT TANK FILL switch to OFF position (WP 0004).

Pull battery disconnect

switch to off position (WP 0007).

Open pump operator’s panel (WP 0207).

Put

DIRECT TANK FILL switch to OPEN position (WP 0004).

Check for continuity across

pump operator’s panel DIRECT TANK FILL switch, from terminal wire 2314 (red) to

terminal wire 2315 (yellow).

If there is no continuity, replace DIRECT TANK FILL switch (WP 0221).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION