TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 552 of 1318

TM 9-2320-328-13&P-1

0064-24

DRAFT

0064

HWT2933

Step 29.

Put DIRECT TANK FILL switch to OFF position (WP 0004).

Pull battery disconnect

switch to off position (WP 0004).

Disconnect pump house wire harness pump house

power distribution wire harness connector DP2.

With a test lead set, check for

continuity across pump house wire harness wire 3856 from pump house wire harness

pump house power distribution wire harness connector DP2, terminal Q to pump house

wire harness direct tank fill valve wire harness connector, terminal 1.

a.

If there is continuity, repair wire 3856 in pump house power distribution

wire harness if repairable (TM 9-2320-325-14&P), or replace pump

house power distribution wire harness and block (WP 0299).

b.

If there is no continuity, repair wire 3856 in pump house wire harness if

repairable (TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION