TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 716 of 1318

TM 9-2320-328-13&P-1

0072-52

DRAFT

0072

Change 1

..

HWT2638B

..

Step 58.

Pull battery disconnect switch to off position (WP 0007).

Disconnect pump house wire

harness pressure governor ECU J1 connector (WP 0288).

Remove fuel level resistor

pack from main wire harness (WP 0292).

With a test lead set, check for continuity

across wire 3353 (green) from pump house wire harness pressure governor ECU J1

connector, terminal 37 to main wire harness fuel level resistor pack connector, terminal

A.

..

If there is continuity, replace fuel level resistor pack (WP 0292).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION