TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 761 of 1318

TM 9-2320-328-13&P-1

0072-97

DRAFT

0072

Change 1

..

HWT2658

..

NOTE

To locate correct datalink cable connector in pump house, follow yellow banded datalink

cable from main wire harness cab pressure governor control connector to first Y connector

in series.

..

Step 118.

Disconnect pump house wire harness datalink cable connector from CAT datalink Y

connector.

With a test lead set, check for continuity across CAT datalink cable CAT Lo

wire (green) from CAT datalink cable Y connector (that was disconnected from pump

house wire harness), terminal B to CAT datalink cable Y connector (that was

disconnected from main wire harness), terminal B.

..

a.

If there is continuity, repair pump house wire harness datalink cable if

repairable (TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

..

b.

If there is no continuity, replace CAT datalink wire harness

(TM 9-2320-325-14&P).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION