TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 852 of 1318

TM 9-2320-328-13&P-1

0076-14

DRAFT

0076

HWT2169

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 23.

Remove cab instrument panel B (WP 0205).

Disconnect cab pump control wire

harness cab power distribution wire harness connector.

With a test lead set, check for

continuity across cab pump control wire harness wire 2855 (red) from cab pump control

wire harness TANK TO PUMP switch connector, terminal 6 to cab pump control wire

harness connector, terminal G.

a.

If there is continuity, repair wire 2855 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

b.

If there is no continuity, repair wire 2855 in cab pump control wire

harness if repairable (TM 9-2320-325-14&P), or replace cab pump

control wire harness (WP 0281).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION