TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1341 of 1390

TM 9-2320-328-13&P-2

0322-1

DRAFT

0322

FIELD LEVEL MAINTENANCE

TANK-TO-PUMP VALVE REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Check valve and fitting must be removed in order to provide clearance when removing

tank-to-pump valve.

•

Tag and mark air lines prior to removal to ensure proper installation.

1.

Remove line (1) from elbow (2).

2.

Remove fitting (3) and check valve (4) from tee (5).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2835

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Compound, Sealing, Pipe Thread

(WP 0400, Item 11)

Tags, Identification (WP 0400, Item 23)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0313

WP 0391, Fig. 20

Equipment Conditions

Air system drained (TM 9-2320-422-10)

Water tank drained (WP 0015)

Pump house panels K and G removed (WP 0339)