TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 355 of 1390

TM 9-2320-328-13&P-2

0139-1

DRAFT

0139

FIELD LEVEL MAINTENANCE

HYDRAULIC OIL DRAIN MOUNTING BRACKET REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Hydraulic hoses may retain residual pressure.

Wear eye protection to prevent eye

injury.

Failure to comply may result in serious injury to personnel.

1.

Loosen jam nut (1) on hydraulic oil drain hose (2).

2.

Remove hydraulic oil drain hose (2) from hydraulic oil drain mounting bracket (3).

3.

Remove two nuts (4), four washers (5), two lockwashers (6), screws (7), and hydraulic oil drain mounting

bracket (3) from vehicle.

Discard lockwashers.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0647

WARNING

ICON 26

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Lockwasher (2)

References

WP 0391, FIg. 10

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)