TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 406 of 1390

TM 9-2320-328-13&P-2

0149-2

DRAFT

0149

INSTALLATION

1.

Install ring (8) on strainer collar (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

2.

Apply adhesive on threads of six screws (3).

3.

Install two gaskets (5), strainer (6), and strainer collar (2) on reservoir (7) with six washers (4) and screws (3).

4.

Install breather (1) on strainer collar (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Close pump house panel K access door (WP 0008)

2.

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT1844

WARNING

ICON 30, 44, 27