TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 413 of 1390

TM 9-2320-328-13&P-2

0151-5

DRAFT

0151

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

13. Remove elbow (18) and preformed packing (34) from adapter block (26).

Discard preformed packing.

14. Remove valve (35) preformed packing (36), two backup rings (37), and preformed packing (38) from adapter

block (21).

Discard preformed packings and backup rings

END OF TASK

INSTALLATION

NOTE

•

Install elbows and fittings as noted prior to removal.

•

Install cable ties as required.

1.

Lightly lubricate two backup rings (37) and preformed packings (38) and (36) with clean oil, and install

preformed packings (38) and (36), backing rings (37), and valve (35) on adapter block (26).

2.

Lightly lubricate preformed packing (34) with clean oil, and install preformed packing (34) and elbow (18) on

adapter block (26).

HWT1843