TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 422 of 1390

TM 9-2320-328-13&P-2

0152-6

DRAFT

0152

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Charge pump weighs 170 lb. (77.18 kg).

Do not attempt to remove hydraulic pump

without the aid of an assistant, two straps and a suitable lifting device.

Failure to

comply may result in injury or death to personnel and damage to equipment.

NOTE

Loops are obtained from the TFFT water pump engine removal kit.

12. Loop 3 ft. (1 m) strap around charge pump (26).

13. Loop 5 ft. (1.5 m) strap through 3 ft. (1 m) strap.

14. Attach suitable lifting device to 5 ft. (1.5 m) strap.

NOTE

Charge pump is lowered to ground.

15. With the aid of an assistant and suitable lifting device, remove four nuts (39), lockwashers (40), eight

washers (41), four screws (42), and charge pump (26) from vehicle.

Discard lockwashers.

HWT1715

WARNING

ICON 7