TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 431 of 1390

TM 9-2320-328-13&P-2

0153-1

DRAFT

0153

FIELD LEVEL MAINTENANCE

POWER TAKE OFF (PTO) REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Tag and mark air lines and hoses prior to removal to ensure proper installation.

•

Cap and plug hoses and fittings upon removal.

1.

Remove air line 2001 (1) from fitting (2).

2.

Remove hose 2278 (3) from elbow (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2202

Tools and Special Tools

Cap Set, Protective (WP 0398, Item 1)

Crows Foot, 10 mm, 0.25 in. (WP 0398, Item 3)

Drain Pan (WP 0398, Item 4)

Standard Automotive Tool Set (SATS),

(WP 0398, Item 15)

• Wrench, Adjustable 18”

• Wrench, Torque, Ratcheting, 3/8” Drive,

75 ft-lb

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Adhesive, Thread, Locking, (WP 0400, Item 6)

Compound, Sealing, Pipe Thread

(WP 0400, Item 11)

Fluid, Hydraulic (WP 0400, Item 17)

Tags, Identification (WP 0400, Item 23)

Materials/Parts (continued)

Lockwasher (4)

Gasket (1)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0391, Fig. 5

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)

Lifting bracket tube brace removed

(TM 9-2320-325-14&P)

Muffler removed (TM 9-2320-325-14&P)

Air system drained (TM 9-2320-422-10)