TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 432 of 1390

TM 9-2320-328-13&P-2

0153-2

DRAFT

0153

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove air line 2159 (5) from tee (6).

4.

Remove air line 2126 (7) from fitting (8).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Disconnect connector C82 (9) from connector C82 (10).

NOTE

An assistant rotating and holding drive shaft aids in drive shaft removal.

6.

With the aid of an assistant, remove four nuts (11), lockwashers (12), screws (13), and drive shaft (14) from

flange (15).

Discard lockwashers.

HWT2202A

HWT2203