TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 440 of 1390

TM 9-2320-328-13&P-2

0153-10

DRAFT

0153

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

18. Install flange (15) on power take off (18) with washer (17) and screw (16).

Tighten screw to 25 lb-ft (34 N•m).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

19. With the aid of an assistant, install drive shaft (14) on flange (15) with four screws (13), lockwashers (12), and

nuts (11).

20. Connect connector C82 (10) to connector C82 (9).

HWT2204A

HWT2203