TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 443 of 1390

TM 9-2320-328-13&P-2

0154-1

DRAFT

0154

FIELD LEVEL MAINTENANCE

POWER TAKE OFF (PTO) DRIVE SHAFT REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

An assistant rotating and holding drive shaft aids in drive shaft removal.

1.

With the aid of an assistant, remove four nuts (1), lockwashers (2), and screws (3) from PTO (4) and drive

shaft (5).

Discard lockwashers.

2.

With the aid of an assistant, remove four nuts (6), lockwashers (7), screws (8), and drive shaft (5) from

pump (9).

Discard lockwashers.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1942

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Lockwasher (4)

Lockwasher (4)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0391, Fig. 5, 6

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)