TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 446 of 1390

TM 9-2320-328-13&P-2

0155-2

DRAFT

0155

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.

Remove two nuts (10), lockwashers (11), screws (12), and valve body (13) from bracket (14).

Discard

lockwashers.

7.

Remove tee (4) and preformed packing (15) from valve body (13).

Discard preformed packing.

8.

Remove elbow (7) and preformed packing (16) from valve body (13).

Discard preformed packing.

9.

Remove elbow (9) and preformed packing (17) from valve body (13).

Discard preformed packing.

NOTE

Perform Step (10) if bracket needs to be removed.

10. Remove nut (18), lockwasher (19), two washers (20), screw (21), and bracket (14) from vehicle.

Discard

lockwashers.

END OF TASK

INSTALLATION

NOTE

Perform Step (1) if bracket was removed.

1.

Install bracket (14) on vehicle with screw (21), two washers (20), lockwashers (19), and nut (18).

2.

Lightly lubricate preformed packing (17) with clean oil, and install preformed packing (17) and elbow (9) on

valve body (13).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2013