TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 445 of 1390

TM 9-2320-328-13&P-2

0155-1

DRAFT

0155

FIELD LEVEL MAINTENANCE

POWER TAKE OFF (PTO) SOLENOID AND PRESSURE SWITCH REPLACEMENT

INITIAL SETUP:

REMOVAL

1.

Disconnect solenoid connector (1) from main wire harness connector (2).

NOTE

•

Note position of elbows prior to removal to ensure proper installation.

•

Tag and mark hoses prior to removal to ensure proper installation.

•

Position drain pan under hoses.

2.

Remove hose (3) from tee (4).

3.

Remove hose (5) from tee (4).

4.

Remove hose (6) from elbow (7).

5.

Remove hose (8) from elbow (9).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2012

Tools and Special Tools

Drain Pan (WP 0398, Item 4)

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Lockwasher (2)

Preformed Packing (1)

Materials/Parts (continued)

Preformed Packing (1)

Preformed Packing (1)

Lockwasher (1)

References

WP 0391, Fig. 5

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)