TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 385 of 844

TM 9-2320-328-13&P-3

0384-5

DRAFT

0384

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Step (12) if decal and bezel needs to be removed.

12. Remove decal and bezel (17) from pump house bracket (6) (WP 0326).

END OF TASK

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Perform Steps (1) and (2) if pump blow out decal and bezel were removed.

1.

Apply spray adhesive to back of decal and bezel (17)

2.

Install decal and bezel (17) on pump house bracket (6) (WP 0326).

HWT1851

WARNING

ICON 30, 44, 27