TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 393 of 844

TM 9-2320-328-13&P-3

0385-3

DRAFT

0385

INSTALLATION

1.

Position lockwasher (6) and nut (5) on fitting (7).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

CAUTION

Use sealing compound sparingly only on pipe threads. Do not apply compound to

hose connections.

Damage to equipment may result.

NOTE

Install cable ties and cushion clips as required.

2.

Apply sealing compound to threads of plug (20), two nipples (15) and (16), fitting (14), and elbow (4).

3.

Install two nipples (16) and (15) on bulkhead fitting (7).

4.

Install plug (20) on cap (17).

5.

Install screen (19), gasket (18), and cap (17) on strainer (13).

6.

Install nipple (16) and bulkhead fitting (7) on strainer (13).

7.

Install elbow (4) on strainer (13).

8.

Install nipple (15) and bulkhead fitting (7) on windshield deluge shutoff valve (12).

9.

Install fitting (14) on windshield deluge shutoff valve (12).

10. Install hose (11) on fitting (14).

HWT0219

WARNING

ICON 30, 44, 27