TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 225 of 392

TM 9-2320-361-10

2-32. OPERATION OF EARTH BORING AND POLESETTING

MAINTENANCE TRUCKS (Contd)

(3)

para.).

(4)

WARNING

Wear hand protection when handling winch cable. Broken

wires may cause injury to personnel.

Pull out cable (2), and rig on sheave (1), as necessary (refer to h. of this

Raise derrick (3) as necessary (refer to c. of this para.).

TA 51729

(5)

Move transfer power takeoff lever (9) up to engaged position and move

rear winch control lever (4) forward, to on position.

(6)

Place power divider control lever (7) in REAR WINCH FWD to wind in

load, and REAR WINCH REV to lower load or unwind cable (2).

(7)

Place transmission gearshift lever (6) in “2” (second) position.

(8)

Release clutch pedal (5) slowly, and depress accelerator pedal (8) enough

to operate winch without racing or stalling engine.

2-164