TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 218 of 392

TM 9-2320-361-10

2-31. OPERATION OF PIPELINE CONSTRUCTION

MAINTENANCE TRUCKS (Contd)

WARNING

Wear hand protection when handling winch cable. Broken

wires may cause injury to personnel.

(11)

Pull cable (20) from winch (refer to b. of this para.), run it under boom

chain (15), under, over, and around tailboard sheave (6), and over and under

A-frame sheave (13).

(13)

Turn side plates (19) and (22) back, screw in retaining pins (18) and (24),

and tighten nuts (17) and (23).

(14)

Take up slack in cable (20) (refer to b. of this para.) and raise

A-frame (25) to position.

2-157

NOTE

Height of A-frame can be adjusted by making boom chains

longer or shorter. Position A-frame at higher angles for

heavier loads.

(12)

Hook end of cable (20) to lashjing hook (21).