TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 209 of 392

TM9-2320-361-10

2-31. OPERATION OF PIPELINE CONSTRUCTION

MAINTENANCE TRUCKS (Contd)

(4)

Unhook safety pins (4), remove tee locking pins (2), and remove stiff leg

jacks (3) from both sides of truck.

(5)

Adjust lower leg (7) in upper leg (6) until lower leg (7) is set firmly on

ground. Install tee locking pin (2) through leg (7) and secure with safety pin (4).

(6)

Pull out drum lock knob (5) and rotate it 90° to unlocked position.

(7)

Place winch clutch lever (1) in off position (toward center of truck).

WARNING

Wear hand protection when handling winch cable. Broken

wires may cause injury to personnel.

NOTE

Do not kink winch cable.

(8)

Fasten winch cable (12) to load.

(9)

Turn adjusting screw (13) right, as necessary, to tighten drag brake and

maintain cable tension.

2-148