TM-9-2320-361-10
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
OPERATOR'S MANUAL
DECEMBER 1988
TM-9-2320-361-10 - Page 282 of 392
TM 9-2320-361-10
CHAPTER 3
MAINTENANCE INSTRUCTIONS
Section I.
Tools and Equipment (page 3-1)
Section II.
Lubrication (page 3-1)
Section III. Troubleshooting (page 3-2)
Section IV. Maintenance Procedures (page 3-17)
Section I. TOOLS AND EQUIPMENT
3-1. SPECIAL TOOLS AND EQUIPMENT
No special tools or test equipment are required by the operator for maintenance of
M44A2 series vehicles.
Tools, equipment, and accessories issued with M44A2 series vehicles or prescribed
for use by the operator of M44A2 series vehicles are listed in the basic issue items
list in appendix B of this manual.
3-3. EXPENDABLE/DURABLE SUPPLIES AND MATERIALS
Supplies and materials required for operation and maintenance of the equipment
covered in this manual are listed in appendix D.
Section Il. LUBRICATION
3-4. LUBRICATION ORDER
Lubrication order LO 9-2320-209-12-1 designates cleaning and lubrication pro-
cedures for M44A2 series vehicles. This document is issued with each vehicle and is
carried in vehicle at all times. A damaged or lost lubrication order should be
replaced immediately.
3-5. GENERAL LUBRICATION INSTRUCTIONS
a. Service Intervals.
Service intervals in the lubrication order are for normal
operation in moderate temperatures, humidity, and atmospheric conditions.
b. Application Points.
Wipe lubricating fittings and surrounding surfaces clean
before and after applying lubricant.
c. Reports and Records.
(1)
Maintain vehicle lubrication record in accordance with DA PAM 738-750.
(2)
Report unsatisfactory performance of lubricants or preserving materials
on DA Form SF368.
Change 2 3-1
3-2.
BASIC ISSUE ITEMS
Back to Top
