TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 309 of 1207

TM 9-2320-361-20

Section Il. ENGINE LUBRICATION SYSTEM MAINTENANCE

3-4. ENGINE LUBRICATION SYSTEM MAINTENANCE INDEX

PARA.

TITLE

PAGE

NO. NO.

3-5.

Oil Dipstick Tube Replacement

3-6

3-6.

Crankcase Breather Tube Maintenance

3-8

3-7.

Engine Oil Filter and Body Maintenance

3-10

3-8.

Crankcase Breather Tube Adapter Replacement

3-13

3-5. OIL DIPSTICK TUBE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Lockwasher

EQUIPMENT CONDITION

Antiseize tape (Appendix C, Item 27)

Parking brake set (TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Dipstick removed (TM 9-2320-361-10).

a. Removal

1. Remove nut (1), lockwasher (7), and screw (3) from bracket (6). Discard lockwasher (7).

2. Remove dipstick tube (5) from engine (4) and bracket (6).

NOTE

Perform step 3 only if oil dipstick tube bracket needs replacement.

3. Remove two nuts (2) and bracket (6) from engine (4).

NOTE

Male pipe threads must be wrapped with antiseize tape before

installation.

Perform step 1 only if oil dipstick tube bracket was removed.

1. Install bracket (6) on engine (4) with two nuts (2).

2. Insert dipstick tube (5) through bracket (6), and install dipstick tube (5) on engine (4).

3. Install screw (3), new lockwasher (7), and nut (1) on dipstick tube bracket (6).

3-6