TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 521 of 1207

TM 9-2320-361-20

7-2. PROPELLER SHAFT MAINTENANCE (Contd)

a. Removal

NOTE

Front transfer to transmission and transmission to differential

front propeller shafts are replaced in the same manner. This

procedure covers the transmission to differential propeller shaft.

1. Chock two wheels on one side of vehicle and jack up two wheels on opposite side of vehicle.

2. Release parking brake (TM 9-2320-361-10).

NOTE

Mark propeller shaft flange positions for installation.

Lift wheel and rotate propeller shaft in step 3 to gain access to

propeller shaft mounting screws and locknuts.

3. Remove four locknuts (4) from studs (1) and separate flange (3) from flange (10) located in parking

brakedrum (2). Discard locknuts (4).

4. Remove four locknuts (5), screws (8), propeller shaft (9), and flange (6) from flange (7). Discard

locknuts (5).

7-2