TM 9-2320-361-20
7-2. PROPELLER SHAFT MAINTENANCE (Contd)
1.
2.
3.
4.
5.
6.
7.
8.
7-4
Install breather (2) in shaft (3).
NOTE
Perform step 2 if lubrication fitting was removed.
Install lubrication fitting (10) in shaft (3).
Install new seal (4) in bore (9) of shaft (3).
Install cap (6) on shaft (7) with open side toward shaft end and slide up on shaft (7).
Install washer (5) on shaft (7).
Coat splines on shaft (7) with a thick film of GAA grease.
Slide splined end of shaft (7) through seal (4) and into internal splines of shaft (3).
Position washer (5) against seal (4) and install cap (6) on shaft (3).