TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 617 of 1207

TM 9-2320-361-20

8-16. FLEXIBLE HYDRAULIC BRAKE LINE MODIFICATION

(Contd)

c. Installation

1.

2.

3.

4.

5.

6.

7.

8.

Loosen brake cylinder inlet conector (17) and rotate 180° (1/2 turn) so that inlet connector (17) is

toward rear of vehicle. Tighten brake cylinder inlet conector (17).

Install new, altered bracket (10) on axle housing (11) with two new screw-assembled lock-

washers (9).

Install new, longer flexible hydraulic brake line (16) to inlet connector (17), and other end to new,

altered bracket (10) with new nut (13).

Install brake line (12) to brake line (16).

Install new spring plate (6) on steering arm (18) with new lockwasher (5) and nut (4). Tighten

nut (4) to 130-167 lb-ft (176-227 NŽm).

Install new clamp (15) and spring (8) on new, long flexible hydraulic brake line (16) with screw (7)

and new locknut (14).

Connect new spring (8) on spring plate (6).

Install steering guard (1) on steering arm (18) with two new lockwashers (3) and nuts (2). Tighten

nuts (2) 130-167 lb-ft (176-227 NŽm).

FOLLOW-ON TASKS:

Fill master cylinder (LO 9-2320-209-12-1).

Bleed service brakes (para. 8-12).

8-44