TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 671 of 1207

TM 9-2320-361-20

9-4. REAR HUB AND DRUM MAINTENANCE (Contd)

d. Installation

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Install new inner bearing seal (5) and inner bearing (4) on spindle (6).

Install six new wheel studs (10) on hub (11).

Install adapter (1) on hub (11) with eight new lockwashers (9) and screws (8). Tighten screws (8)

81-104 lb-ft (110-141 NŽm) and install new safety wire (7).

Install hub (11) in drum (16).

Install deflector (2) on adapter (1) with ten new bolts (3).

Install inspection cover (15), ten new lockwashers (14), and new locknuts (13). Tighten locknuts (13)

31-39 lb-ft (42-53 NŽm).

CAUTION

Do not slide hub and drum assembly over threaded end of spindle,

or damage to equipment may result.

Install hub (11) and drum (16) on spindle (6).

CAUTION

Do not slide seal over threaded end of spindle, or damage to seal

may result.

Install outer bearing (17) and new cork gasket (12) in keyway of spindle (6), and install new outer

seal (18) on spindle (6).

Install inner adjusting nut (19) on spindle (6), and adjust wheel bearings (para. 9-5).

Install rear wheels (TM 9-2320-361-10), but do not lower.

FOLLOW-ON TASKS:

Install rear axle shaft flange (para. 7-10).

Check brake adjustment (para. 8-8).

9-10