TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 690 of 1207

TM 9-2320-361-20

10-6. REAR BUMPERETTE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All (except M275A2,

TM 9-2320-361-10

M764, M342A2)

TM 9-2320-361-20P

MATERIALS/PARTS

EQUIPMENT CONDITION

Six locknuts

Parking brake set (TM 9-2320-361-10).

Rear composite light removed (para. 4-46).

1. Remove two locknuts (2) and screws (4) from crossmember (3) and rear bumperette (5). Discard

locknuts (2).

NOTE

Wiring harness clamp is located on left side only.

2. Remove four locknuts (1), screws (7), composite light bracket (6), clamp (9), and rear bumperette (5)

from frame (8). Discard locknuts (1).

b. Installation

1. Install rear bumperette (5) on rear crossmember (3) with two screws (4) and new locknuts (2).

NOTE

Wiring harness clamp is located on left side only.

2. Install composite light bracket (6) and clamp (9) on bumperette (5) and frame (8) with four

screws (7) and new locknuts (1).

FOLLOW-ON TASK: Install rear composite light (para. 4-46).

10-7