TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 697 of 1207

TM 9-2320-361-20

10-10. FRONT WINCH EXTENSION REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Ten locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Front winch removed (para. 13-5).

Brush guard removed (para. 10-8).

1. Remove four locknuts (5) and screws (3) from bottom of frame rail (2). Discard locknuts (5).

2. Remove six locknuts (4), screws (7), loop tiedown (1), and front winch extension (6) from frame

rail (2). Discard locknuts (4).

b. Installation

1. Install front winch extension (6), and loop tiedown (1) on frame rail (2) with six screws (7) and new

locknuts (4). Do not tighten nuts (4).

2. Install four screws (3) and new locknuts (5) through bottom of frame rail (2) and front winch

extension (6).

3. Tighten nuts (5).

FOLLOW-ON TASKS:

Install front winch (para. 13-5).

Install brush guard (para. 10-8).

10-14