TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 705 of 1207

TM 9-2320-361-20

11-6. CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT

This task covers:

a. Window Regulator Handle Removal

c. Cab Door Window Regulator Installation

b. Cab Door Window Regulator Removal

d. Window Regulator Handle Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Parking brake set (TM 9-2320-361-10).

REFERENCES (TM)

Cab door glass removed (para. 11-5).

TM 9-2320-361-10

TM 9-2320-361-20P

a. Window Regulator Handle Removal

Remove screw (6), window regulator handle (5), and washer (4) from cab door window regulator (7).

b. Cab Door Window Regulator Removal

NOTE

Cab door window regulator must be supported as last screw is

removed.

1. Remove four screws (3) from inner door panel (2) and cab door window regulator (7).

2. Slide regulator arm stud (8) out of stationary track (9) and remove cab door window regulator (7)

through cab door (1) inspection hole.

c.

Cab Door Window Regulator Installation

1. Install window regulator (7) through cab door (1) inspection hole and slide regulator arm stud (8)

into stationary track (9).

NOTE

Regulator arm stud must be held in stationary track when

installing window regulator to inner door panel.

2. Install window regulator (7) on inner door panel (2) with four screws (3).

d. Window Regulator Handle Installation

Install washer (4) and window regulator handle (5) on window regulator (7) with screw (6).

11-8