TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 707 of 1207

TM 9-2320-361-20

11-7. OUTSIDE DOOR HANDLE, INSIDE DOOR HANDLE, AND CAB DOOR LOCK

REPLACEMENT

This task covers:

a. Outside Door Handle Removal

b. Inside Door Handle Removal

c. Cab Door Lock Removal

d. Cab Door Lock Installation

e. Inside Door Handle Installation

f. Outside Door Handle Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Six screw-assembled lockwashers

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Cab door inspection hole cover removed

(para. 11-2).

a. Outside Door Handle Removal

1. Remove two screws (1) from door handle (8) and door (4).

2. Rotate door handle (8) 1/4 turn counterclockwise and remove from cab door (4).

b. Inside Door Handle Removal

Remove screw (5), door handle (3), and washer (2) from cab door lock (7).

c. Cab Door Lock Removal

1. Remove six screw-assembled lockwashers (6) from cab door (4). Discard screw-assembled

lockwashers (6).

2. Remove cab door lock (7) through inspection hole in cab door (4).

d. Cab Door Lock Installation

1. Install cab door lock (7) through inspection hole in cab door (4).

2. Install cab door lock (7) on cab door (4) with six new screw-assembled lockwashers (6).

e. Inside Door Handle Installation

Install washer (2) and door handle (3) on cab door lock (7) with screw (5).

I

f. Outside Door Handle Installation

Install outside door handle (8) on cab door (4) with two screws (1).

11-10