TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 701 of 1207
TM 9-2320-361-20
11-4. CAB DOOR AND HINGES REPLACEMENT
This task covers:
a. Cab Door Removal
c. Cab Door Hinges Installation
b. Cab Door Hinges Removal
d. Cab Door Installation
INITIAL SETUP:
APPLICABLE MODELS
All
MATERIALS/PARTS
Two locknuts
PERSONNEL REQUIRED
Two
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
Cab door lock removed (para. 11-7).
Cab door dovetail wedge removed (para. 11-3).
Cab door weatherseal removed (para. 11-10).
Cab door window regulator removed (para. 11-6).
Cab door check rod removed (para. 11-8).
Side panel removed (para. 11-11).
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-20P
a. Cab Door Removal
NOTE
Assistant will help with steps 1 and 2.
1. Remove two locknuts (6), washers (7), and hinge screws (1) from three mirror braces (2) and two cab
door hinges (4). Discard locknuts (6).
2. Remove cab door (5) from hinges (9) mounted on cab (8) “A” pillar (10).
b. Cab Door Hinges Removal
Remove sixteen screws (3) and cab door hinges (4) and (9) from cab door (5) and cab (8) “A” pillar (10).
c. Cab Door Hinges Installation
Install two cab door hinges (4) on cab door (5) and two hinges (9) on cab (8) “A” pillar (10) with sixteen
screws (3).
I
d. Cab Door Installation
1
NOTE
Assistant will help with steps 1 and 2.
1. Lift cab door (5) and position cab door hinges (4) to hinges (9) mounted on cab (8) “A” pillar (10) and
aline three mirror braces (2) to hinges (4) and (9).
2. Install two hinge screws (1) through three mirror braces (2) and hinges (4) and (9).
3. Install two washers (7) and two new locknuts (6) on hinge screws (1). Tighten locknuts (6).
11-4
Back to Top
