TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 715 of 1207

TM 9-2320-361-20

11-12. HEADLIGHT BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Brush guard removed (para. 10-8).

REFERENCES (TM)

Sealed beam and headlight housing removed

(para. 4-39).

TM 9-2320-361-10

Blackout drive lamp and housing removed

(para. 4-42).

a. Removal

1. Remove two screws (5), washers (4), and brace (7) from front fender (1) and headlight bracket (9).

2. Remove three nuts (15), washers (14) and (11), and screws (10) from headlight bracket (9).

3. Remove two nuts (16), washers (17), and screws (6) from front hinge (2) and side panel (3).

4. Remove two nuts (13), washers (12), screws (8), and headlight bracket (9) from front fender (1).

1. Install headlight bracket (9) on front fender (1) with two nuts (13), washers (12), and screws (8).

2. Install front hinge (2) on side panel (3) with two nuts (16), washers (17), and screws (6).

3. Install headlight bracket (9) on front fender (1) with three nuts (15), washers (14) and (11), and

screws (10).

4. Install brace (7) on headlight bracket (9) and front fender (1) with two washers (4) and screws (5).

11-18