TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 723 of 1207

TM 9-2320-361-20

11-17. CAB COWL VENT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Cotter pin

EQUIPMENT CONDITION

Adhesive (Appendix C, Item 2)

Parking brake set (TM 9-2320-361-10).

a. Removal

1.

Remove nine screws (4) and cowl vent screen (5) from kick panel (1).

2. Remove cotter pin (8), hinge pin (3), and cab cowl vent door (6) from bracket (2). Discard cotter

pin (8).

3. Inspect cab cowl vent door seal (7). If damaged, clean cab cowling seal mounting surface (9) free of

cab cowl vent seal (7) debris.

NOTE

Perform steps 1 and 2 only if seal was removed.

1. Apply adhesive to mounting side of seal (7) and cab cowling seal mounting surface (9).

2. Install cab cowl vent seal (7) on cab cowling seal mounting surface (9).

3. Install cab cowl vent door (6) and hinge pin (3) on bracket (2) with new cotter pin (8).

4. Install cab cowl vent screen (5) on kick panel (1) with nine screws (4).

11-26