TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 725 of 1207

TM 9-2320-361-20

11-18. GLOVE COMPARTMENT REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Adhesive (Appendix C, Item 2)

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Remove two screws (2) and bracket (3) from instrument panel (4).

2. Remove ten screws (9) and glove compartment (1) from instrument panel (4).

3. Remove four nuts (5), screws (7), and glove compartment door (6) from instrument panel (4).

NOTE

Perform step 4 if glove compartment door is damaged.

4. Inspect glove compartment door seal (8). If damaged, clean glove compartment door (6) seal

mounting surface free of seal (8) debris.

NOTE

Perform steps 1 and 2 only if seal was removed.

1. Apply adhesive to glove compartment door (6) seal mounting surface and mounting side of seal (8).

2. Install seal (8) on glove compartment door (6).

3. Install bracket (3) on instrument panel (4) with two screws (2).

4. Install glove compartment door (6) on instrument panel (4) with four screws (7) and nuts (5).

5. Install glove compartment (1) on instrument panel (4) with ten screws (9).

11-28