TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 739 of 1207
TM 9-2320-361-20
11-26. COMPANION SEAT MAINTENANCE
This task covers:
a. Companion Seat Backrest Removal
e. Frame Assembly
b. Companion Seat Cushion Removal
f. Companion Seat Installation
c. Companion Seat Removal
g. Companion Seat Cushion Installation
d. Frame Disassembly
h. Companion Seat Backrest Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
20P
MATERIAL/PARTS
TM 9-2320-361-
Six locknut
EQ
Seven cotter pins
Parking b
UIPMENT CONDITION
rake set (TM
9-2320-361-10).
Four screw-assembled washers
a. Companion Seat Backrest Removal
Remove backrest (1) from backrest frame (29).
b. Companion Seat Cushion Removal
1. Remove screw (4) and locknut (17) from link (15) and cushion (18). Discard locknut (17).
2. Remove cotter pin (25), washers (27), pin (28), and cushion (18) from cushion frame (21). Discard
cotter pin (28).
c. Companion Seat Removal
1. Unlatch fastener (7) from backrest frame (29).
NOTE
If fastener is damaged, refer to para. 11-13.
2. Remove four screw-assembled washers (20) and cushion frame (21) from cab floor (13). Discard
screw-assembled washers (20).
d. Frame Disassembly
1. Remove four cotter pins (3), washers (2), pins (6), and backrest frame (29) from link (5), link (26),
and cushion frame (21). Discard cotter pins (3).
2.
Remove locknut (19), screw (24), two washers (22), sleeve (23), and link (26) from cushion
frame (21). Discard locknut (19).
3. Remove cotter pin (12), pin (16), and link (15) from cushion frame (21). Discard cotter pin (12).
4. Remove cotter pin (9), washer (8), and link (5) from cushion frame (21). Discard cotter pin (9).
5. Remove four locknuts (14), screws (10), and leg (11) from cushion frame (21). Discard locknuts (14).
e. Frame Assembly
1. Install leg (11) on cushion frame (21) with four screws (10) and new locknuts (14).
2. Install link (5) on cushion frame (21) with washer (8) and new cotter pin (9),
3. Install link (15) on cushion frame (21) with pin (16) and new cotter pin (12).
4. Install link (26) on cushion frame (21) with screw (24), two washers (22), sleeve (23), and new
locknut (19).
11-42
Back to Top
