TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 993 of 1207

TM 9-2320-361-20

13-16. REAR WINCH OIL DRAINTUBE REPLACEMENT (M764)

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M764

LO 9-2320-209-12-1

MATERIALS/PARTS

TM 9-2320-361-10

TM 9-2320-361-20P

Locknut

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

NOTE

Have drainage container ready to catch oil.

1. Remove pipe plug (6) from elbow (7) and drain oil.

2. Remove locknut (4), screw (9), and clamp (8) from bracket (5). Discard locknut (4).

3. Remove elbow (7), pipe nipple (3), elbow (2), pipe nipple (l), and elbow (10) from worm gear

housing (11).

1. Install elbow (10), pipe nipple (l), elbow (2), pipe nipple (3), and elbow (7) to worm gear

housing (11).

2. Install pipe nipple (3) on bracket (5) with clamp (8), screw (9), and new locknut (4).

3. Install pipe plug (6) on elbow (7).

FOLLOW-ON TASK: Fill worm gear housing (LO 9-2320-209-12-1).

13-28