TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 988 of 1207

TM 9-2320-361-20

13-13. REAR WINCH CABLE REPLACEMENT (M756A2)

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

M756A2

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

EQUIPMENT CONDITION

• Parking brake set (TM 9-2320-361-10).

• Rear winch cable unwound (TM 9-2320-361-10).

GENERAL SAFETY INSTRUCTIONS

Wear leather gloves when handling rear winch cable.

WARNING

Wear leather gloves when handling cable. Do not let cable run

through hands. Broken or rusty wires can cause injury to personnel.

1. Loosen setscrew (2) and remove rear winch cable (3) from drum (l).

2. Remove nut (6) and screw (4) from clevis (5) and remove chain (7).

1. Install chain (7) on clevis (5) with screw (4) and nut (6).

2. Install rear winch cable (3) in drum (1) and tighten setscrew (2).

FOLLOW-ON TASK: Wind rear winch cable on rear winch drum (TM 9-2320-361-10).

13-23