TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 981 of 1207

TM 9-2320-361-20

13-9. REAR WINCH DRUM CLUTCH LEVER AND GUIDE PLATE REPLACEMENT (M756A2)

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M756A2

TM 9-2320-361-10

MATERIALS/PARTS

Two lockwashers

Two grooved pins

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Remove two screws (3), lockwashers (4), washers (5), data plate (6), and guide plate (7) from cab

protector (2). Discard lockwashers (4).

2. Remove pin (8) and clutch lever (1) from winch shaft (9). Discard pin (8).

3. Remove pin (10), spring guide (11), center post (12), and two springs (13) from clutch lever (1).

Discard pin (10).

1.

2.

3.

Install spring guide (11), spring (13), center post (12), spring (13), and new pin (10) in clutch

lever (1).

Install clutch lever (1) on winch shaft (9) with new pin (8).

Install guide plate (7) and data plate (6) on cab protector (2) with two washers (5), new

lockwashers (4), and screws (3).

13-16