TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 982 of 1207

TM 9-2320-361-20

13-10. REAR WINCH CABLE REPLACEMENT (M764)

This task covers:

a. Removal

c. Installation

b. Inspection

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

M764

Parking brake set (TM 9-2320-361-10).

REFERENCES (TM]

Rear winch cable unwound (TM 9-2320-361-10).

TM 9-2320-361-10

GENERAL SAFETY INSTRUCTIONS

TM 9-2320-361-20P

Wear leather gloves when handling rear winch cable.

WARNING

Wear leather gloves when handling cable. Do not let cable run through

hands. Broken or rusty wires can result in injury to personnel.

Remove screw (2), clamp (3), and winch cable (5) from drum (1) and pull winch cable (5) out through

level wind (4).

Inspect winch cable (5) for damage; replace if damaged.

Install cable (5) through level wind (4) onto drum (1) with clamp (3) and screw (2).

FOLLOW-ON TASK: Wind winch cable (TM 9-2320-361-10).

13-17