TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 978 of 1207

TM 9-2320-361-20

13-7. WINCH DRUM LOCK REPLACEMENT (M756A2)

This task covers:

a. Removal

c. Installation

b. Inspection

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

M756A2

Parking brake set (TM 9-2320-361-10).

MATERIALS/PARTS

GENERAL SAFETY INSTRUCTIONS

Lubricating oil OE/HDO 30

(Appendix C, Item 18)

Have fire extinguisher nearby when using

drycleaning solvent.

Drycleaning solvent (Appendix C, Item 26)

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

1. Remove jamnut (3), nut (4), and drum lock latch (5) from poppet (l).

2. Remove poppet nut (6), spacer (7), spring (8), and poppet (1) from winch (2).

WARNING

Drycleaning solvent is flammable and will not be used near open

flame. Use only in well-ventilated places. Failure to do so may

result in injury to personnel.

1. Clean all parts in drycleaning solvent.

2. Inspect all parts for cracks, breaks, or scoring. If parts are damaged, replace.

3. Apply light coat of lubricating oil to poppet (l).

1. Install poppet (1), spring (8), spacer (7), and poppet nut (6) in

2. Install latch (5) on poppet (1) with nut (4) and jamnut (3).

winch (2).

13-13