TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 994 of 1207

TM 9-2320-361-20

13-17. REAR WINCH OIL DRAINTUBES REPLACEMENT (M756A2)

This task covers:

a. Gearcase Draintube Removal

c. End Frame Draintube Installation

b. End Frame Draintube Removal

d. Gearcase Draintube Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M756A2

LO 9-2320-209-12-1

MATERIALS/PARTS

TM 9-2320-361-10

TM 9-2320-361-20P

Two locknuts

EQUIPMENT CONDITION

• Parking brake set (TM 9-2320-361-10).

• Rear winch oil drained (LO 9-2320-209-12-1).

1. Remove two locknuts (2), screws (3), clamp (4), and bracket (11) from pipe (12) and support (14).

Discard locknuts (2).

2. Remove elbow (5), pipe (12), and elbow (13) from gearcase (1).

Remove elbow (10), pipe (9), elbow (8), and pipe (7) from end frame (6).

Install pipe (7), elbow (8), pipe (9), and elbow (10) on end frame (6).

1. Install elbow (13), pipe (12), and elbow (5) on gearcase (1).

2. Install clamp (4) and bracket (11) on pipe (12) and support (14) with two screws (3) and new

locknuts (2).

FOLLOW-ON TASK: Install drainplugs and fill rear winch (LO 9-2320-209-12-1).

13-29