TM 9-2320-361-24-1
0015 00
0015 00-3
HEATING SYSTEMS TROUBLESHOOTING (Contd)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. ENGINE MANIFOLD
HEATER DOES NOT
WORK (Contd)
Test 4. Test manifold heater spark
plug.
1. Remove manifold heater
spark plug (WP 0065 00 or
WP 0066 00).
2. Connect jumper wire from
spark plug to engine ground.
3. Disconnect wiring harness
from manifold heater fuel
pump.
4. Turn power accessory switch
to ON position.
5. Position manifold heater
switch to START.
Test 5. Test manifold spark plug
cable.
1. Remove cable from manifold
heater spark plug
(WP 0065 00 or WP 0066 00).
2. Remove spark plug cable at
ignition coil.
3. Set multimeter to RX 1000
scale.
4. Touch multimeter negative
lead to contact end of spark
plug cable at the plug.
1. If spark plug does arc, go to test 9.
2. If spark plug does not arc, replace
spark plug. (WP 0065 00 or
WP 0066 00) and repeat test 4.
3. If retest of test 4 fails to produce an
arc to engine, go to test 5.
Table 1. Heating Systems Troubleshooting Procedures (Contd).
MANIFOLD
HEATER SPARK
MANIFOLD
HEATER
SPARK PLUG
TEST 5
STEPS 4
AND 5
FUEL PUMP
IGNITION COIL