TM 9-2320-361-24-1
0015 00
0015 00-5
HEATING SYSTEMS TROUBLESHOOTING (Contd)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. ENGINE MANIFOLD
HEATER DOES NOT
WORK (Contd)
Test 7. Test fuel pump-to-ignition coil
wiring harness.
1. Disconnect wiring harness
input to ignition coil.
2. Set multimeter to 24 VDC scale.
3. Turn power accessory switch
to the ON position and touch
multimeter negative lead to
pin B (negative) of wiring
harness at ignition coil.
4. Touch multimeter positive
lead to pin A (positive) of
wiring harness at ignition
coil.
1. If voltage is present, go to test 9.
2. If voltage is not present, go to
test 8.
Table 1. Heating Systems Troubleshooting Procedures (Contd).
FUEL PUMP
IGNITION COIL
PIN A
IGNITION COIL
WIRING HARNESS
PIN B
TEST 7
STEP 4