TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 209 of 764

TM 9-2320-361-34

8-4. TRANSMISSION TOP COVER REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-20

TOOLS

TM 9-2320-361-34P

General mechanic’s tool kit

EQUIPMENT CONDITION

(Appendix B, Item 1)

●

Transmission gearshift lever removed

Torque wrench, 1/2-in. dr. (Appendix B, Item 7)

(TM 9-2320-361-20).

MATERIALS/PARTS

.

Cab tunnel cover removed (TM 9-2320-361-20).

Gasket (Appendix F, Item 81)

Eight screw-assembled lockwashers

(Appendix F, Item 157)

a. Removal

CAUTION

Prevent dirt from entering transmission when performing this task.

Failure to do so may damage equipment.

Remove eight screw-assembled lockwashers (1), transmission top cover (6), and gasket (4) from

transmission (3). Discard screw-assembled lockwashers (1) and gasket (4).

I

b. Installation

1. Aline shifter forks (5) with synchronizers (2).

2. Install new gasket (4) and transmission top cover (6) on transmission (3) with eight new screw-

assembled lockwashers (1). Tighten screw-assembled lockwashers (1) 25-32 lb-ft (34-43 N-m).

/

FOLLOW-ON TASKS: . Install cab tunnel cover (TM 9-2320-361-20).

●

Install transmission gearshift lever (TM 9-2320-361-20).

8-8