TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 199 of 764

M275A2

TM 9-2320-361-34

I

7-4. REAR WIRING HARNESS REPLACEMENT

(Contd)

25. Connect wire (6) to fuel sending unit (12).

26. Connect plug (14) to fuel pump (13).

27. Install ground wire (3) on support (4) with new lockwasher (2), screw (5), and new locknut (1).

28, Remove slack from rear wiring harness (9) and install two clamps (7) on rear wiring harness (9) and

crossmember (10) with two screws (8) and new locknuts (11).

NOTE

Perform steps 29 through 31 for M275A2 vehicles.

29. Connect wire (18) to fuel sending unit (19).

30. Connect plug (23) to fuel pump (22).

31. Install ground wire (17) to support (16) with new lockwasher (21), screw (20), and new locknut (15).

7-4 8