TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 193 of 764

TM 9-2320-361-34

7-4. REAR WIRING HARNESS REPLACEMENT

(Contd)

CAUTION

●

Prior

to

removal

of

wiring

harness, ensure all clamp removals and

wire disconnections have been performed. Failure to do so may

result in damage to equipment.

●

Use care when removing or installing rear wiring harness.

Snagging and pulling may cause damage to rear wiring harness.

NOTE

Perform step 32 for all vehicles except M275A2

32. Remove rear wiring harness (1) from left side frame (5) and four cross braces (2) and through two

holes (4) and hole (3).

NOTE

Perform step 33 for M275A2 vehicles.

33. Remove rear wiring harness (1) from left side frame (5) and five cross braces (6) and through

holes (3) and (4).

b. Installation

NOT E

Perform step

1

for all vehicles except M275A2.

1. Route rear wiring harness (1) between front left side frame (5) and four cross braces (2) and through

two holes (4) and hole (3).

NOTE

Perform step 2 for M275A2 vehicles.

2. Route rear wiring harness (1) between left side frame (5) and five cross braces (6) and through

hole (3) and hole (4).

7-42