TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 191 of 764

M764

TM 9-2320-361-34

7-4. REAR WIRING HARNESS REPLACEMENT

(Contd)

24.

25.

26.

27.

28.

29.

30.

31.

NOTE

●

Perform

steps 24 through 27 for M764 vehicles.

●

Steps

24

through

27 cover the left side composite light extensions.

Disconnect wires (2), (3), (5), and (6) from extension wires (22), (21), (20), and (7).

Disconnect extension wires (17), (10), (11), and (12) from rear composite light wires (16), (15), (14),

and (13).

Remove five locknuts (9), six screws (18), and clamps (1) from bracket (19), composite light bracket (8),

subframe (4), tail frame (27), and two extension wires (29). Discard locknuts (9).

Remove locknut (28), screw (23), and clamp (26) from rear wiring harness (25) and brace (24).

Discard locknut (28).

Repeat steps 24 through 27 for M764 right side composite light extensions.

NOTE

●

Perform

steps

29 and 30 for M275A2 vehicles.

●

Steps

29

and

30

cover the left rear composite light disconnection.

Disconnect wires (33), (34), (35), and (36) from rear composite light wires (40), (39), (38), and (37).

Remove nut (30) and clamp (31) from stud (32) and rear wiring harness (25).

Repeat steps 29 and 30 for M275A2 right rear composite light disconnection.

7-40